Sharp R-22AT - Manual (Page 10)

9
NUMBER POWER
%
2
NUMBER POWER
%
1
MEMORY CHECK
Step Action
2
Select check mode. 1
Cancel check mode. 3
CHECKING THE MAGNIFICATION FACTOR FOR DOUBLE QUANTITY
* Example: If you want to know the magnification factor for double quantity in MEMORY 1. (1.67 is
programmed.)
Step Action
1
2
3
Select double quantity cooking mode.
Select check mode.
Cancel check mode. 4
Note: Magnification factor 1.80 for the double quantity is stored in all memories unless changed.
You can check the information programmed into the memory.
CHECKING TIME AND POWER LEVEL
* Example: If you want to know the information that you have programmed into memory 1, this memory has been
programmed for 4 minutes at 60% as the 1st sequence and 2 minutes at 30% as the 2nd sequence.
Display Press pad
NUMBER CHECK CHECK
CHECK
CHECK
Display Press pad
CHECK
1
1
DOUBLE
QUANTITY
CHECK NUMBER
DOUBLE
NUMBER CHECK
DOUBLE
NUMBER CHECK
Select memory number. 1
Note: When is displayed at Step 2, the memory is not set.
Select memory number. 1
Repeat