Sharp LC-90LE757K - Manual (Page 38)

36
Picture settings
Go to “TV Menu” > “Setup” > “Picture”.
Setup
Picture
CH list
:Back :Enter
Menu
Backlight
AV mode
OPC
[Off]
3D brightness boost
[Middle]
Picture
AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
Press a/b to select the desired mode, and
then press ;.
• You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing #.
Item
AUTO
The TV automatically sets the
appropriate selection from the “AV
mode” menu depending on the
lighting conditions and the type of
programme watched.
STANDARD
For a highly defined image in a
normally bright room.
MOVIE
For viewing a movie in a darkened
room.
GAME For playing of video games.
PC* 1 For PC.
USER
Allows you to customise settings as
desired. You can set the mode for
each input source.
DYNAMIC
For a clear-cut image emphasising
high contrast for sports viewing.
DYNAMIC (Fixed)
For a clear-cut image emphasising
high contrast for sports viewing
(the “Picture” and “Audio” settings
cannot be adjusted).
STANDARD (3D)
Refer to page 75 for details. MOVIE (3D)
GAME (3D)
I “PC” is available only when selecting “HDMI 1”, “HDMI 2”,
“HDMI 3”, “HDMI 4” or “PC” from the “INPUT” menu.
NOTE
• If you select “AUTO”, some selections in the “AV mode”
menu may not be automatically set.
Picture
OPC
Automatically adjusts the brightness of the screen.
Item
Off
The brightness is fixed at the value set in
“Backlight”.
On Automatically adjusts.
On:Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
NOTE
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness.
Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
• This function does not work when “3D brightness
boost” is set to “High” or “Low”.
Basic adjustment