Sharp LC-90LE757K - Manual (Page 89)

87
LC-80LE657E/LC-80LE657RU/LC-80LE657EN/LC-80LE657KN/
LC-90LE757E/LC-90LE757RU/LC-90LE757K
The wall mount kit (sold separately) allows you to mount the TV on the wall. For
detailed information on installing the wall mount, see the instructions provided
with the product. We recommend you to contact qualified service peronnel when
installing it. SHARP is not responsible for any damage to the product or injury to
yourself or others if you choose to install the wall mount on your own.
CAUTION
• Install your wall mount on a solid wall perpendicular to the floor. When you want
to attach the wall mount to surfaces other than plaster board, please contact your
nearest retailer/adviser for additional information. If you install the TV on a ceiling
or slanted wall, it may fall and result in severe personal injury. Always have two
people mount the TV on a wall.
Wall mount kit specifications
Standard dimensions for wall mount kits are shown below.
B
A
175
375
340
40
400
200
B
600 A 80
27.8 Max
Max
Min
Max
WALL MOUNT KIT* 1
WALL
WALL MOUNT KIT* 1
Max
WALL MOUNT UNIT
MOUNTING HOLES
SCREW
CABINET
12
DEPTH OF
MOUNTING HOLES
• VESA screw hole specs (A - B) in millimeters 600 – 400
• Standard screw M8* 2
• Quantity 4
I Must be smaller than the shaded area.
J Use 1.25 pitch screws.
NOTE
• Do not mount the TV at an angle.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the cable tie as needed.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length. Screws that are too long
may cause damage to the inside of the TV set.
• Do not fasten the screws too firmly or loosely. This may damage the product or cause
the product to fall, leading to personal injury. SHARP is not liable for these kinds of
accidents.
• SHARP is not liable for product damage or personal injury when a non-VESA or non-
specified wall mount is used or the consumer fails to follow the product installation
instructions.
Do not install the wall mount kit while your TV is turned on. It may
result in personal injury due to electric shock.
E Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
Appendix