Sharp LC-90LE757K - Manual (Page 40)

38
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of
e2 to a
minimum of f2.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending
on the vertical frequency), analyses it and then
recreates each still film frame for high-definition
picture quality.
Item
Advanced
Adjusts effect to reduce judder
from film contents. You can select
a desired level of judder reduction
from 0 to
e10.
Standard
Plays back images with equal
display time for each frame,
reproducing movie theatre
experience.
Off Normal viewing mode.
Active contrast
Automatically adjusts the contrast of an image
according to the scene (“Advanced”, “Standard”,
“Off”).
DNR
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
• This function may not be available depending on the
input signal type.
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to
your preferences. The adjustment range of the OPC
sensor can be set to a maximum of
e16 and a
minimum of f16.
NOTE
• This function is available only when the “OPC” setting is
set to “On” or “On:Display”.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to
the same number.
• Depending on the brightness of the surrounding light,
the OPC sensor might not operate if the adjustment
range is small.
Basic adjustment