Sharp MX-M232D - Manual (Page 42)

40
ADVANCED TRANSMISSION METHODS
Deleting documents from the Public Box
This procedure is used to delete documents from the Public Box when they are no longer needed.
1 Follow steps 2 to 6 of "Scanning a
document into polling memory (the
Public Box)" (page 38) and then follow
the steps below.
2 Select "DELETE" with the [ ] or [ ]
key.
3 Press the [OK] key.
A screen appears asking you to confirm the deletion.
4 Select "YES" with the [ ] or [ ] key.
To cancel the deletion, select "NO".
5 Press the [OK] key.
The documents are deleted
from the Public Box.
Restricting polling access (polling security)
If you wish to prevent unauthorised fax machines from polling your machine, enable the polling security function.
When this function is enabled, polling permission will only be granted if the fax number of the polling machine
(programmed in that machine as the sender's number) matches one of the fax numbers you have programmed in
your machine as passcode numbers. Up to 10 fax numbers can be programmed as passcode numbers.
To enable the polling security function and program passcode numbers, see "POLLING PASSCODE # MODE"
(page 111) in the system settings.
PQ
ACC
LEX SCAN
LEX SCAN
DED COPY
ORIGINAL
ADD
CHANGE
DELETE
PRINT
GHI
PQRS
BACK OK
DELETE
YES
NO
Deletion is not possible while the Public Box
is being used.
DELETE
YES
NO
OK
Note
• If you do not use the polling security function, the document will be sent to any fax machine that polls you.
• To use polling memory with polling security enabled, the sender's number of the polling machine must be
programmed in that machine and in your machine.
Note