F-code confidential transmission – Sharp MX-M232D User Manual

Page 62

Advertising
background image

60

TRANSMISSION USING F-CODES

F-code confidential transmission

1

Follow steps 1 to 4 of "BASIC
PROCEDURE FOR SENDING FAXES"
(page 17) and then
follow the steps
below.

2

Press the [SPECIAL FUNCTION] key.

When the [SPECIAL
FUNCTION] key is pressed, the
special function selection
screen appears.

3

Select "SENDING OPTIONS" with the
[

] or [

] key.

4

Press the [OK] key.

5

Select "SUB ADDRESS TX" with the
[

] or [

] key.

6

Press the [OK] key.

7

Enter the fax number of the other
machine with the numeric keys, or
press a Rapid key, or dial a Speed Dial
number (a group key cannot be used).

To clear a mistake when
entering a number with the
numeric keys, press the [C] key
to clear one digit at a time.

A destination selected with a Rapid key or Speed Dial
number is indicated by an icon and a number. To clear
an entry, press the [C] key.

8

Press the [OK] key.

9

Enter the sub-address (maximum 20
digits) with the numeric keys.

• Characters that can be entered are numbers, "#",

and spaces. However, the initial character cannot be
a space.

• If you make a mistake, press the [C] key and re-enter

the correct digit(s).

• If you specified a Rapid key or Speed Dial number in

step 7 that has a sub-address programmed, the
sub-address will appear. Go to the next step without
entering a sub-address.

10

Press the [OK] key.

11

Enter the passcode (maximum 20
digits) with the numeric keys.

• Characters that can be entered are numbers, "#",

and spaces. However, the initial character cannot be
a space.

• If you make a mistake, press the [C] key and re-enter

the correct digit(s).

• If you specified a Rapid key or Speed Dial number in

step 7 that has a passcode programmed, the
passcode will appear. Go to the next step without
entering the passcode.

12

Press the [OK] key.

13

Press the [START] key (

).

• Scanning begins.
• If you are scanning from the document glass and

have another page to scan, change pages and press
the [START] key (

). Repeat until all pages have

been scanned and then press the

key.

EXPOSURE
COLOUR MODE

PAPER SE
RESOLUT

COPY
SCAN

SPECIAL

FUNCTION

LINE

DATA

DATA

ON LINE

PQ

ACC

LEX SCAN
LEX SCAN

DED COPY

SPECIAL FUNCTION
FAX PRINT HOLD
TIMER MODE

SENDING OPTIONS

SENDING OPTIONS
SERIAL POLLING

SUB ADDRESS TX

SUB ADD POLLING

WXYZ

36

37

38

31

32

33

26

27

28

A

B

C

F

G

H

WXYZ

WXYZ

MNO

WXYZ

@.-_

AD-END

Advertising
This manual is related to the following products: