Sharp UP-3500 - Manual (Page 13)

12
When you have completed the programming at the master, you can distribute the preset data from the
master to all or desired satellites in the IRC system.
(1) Initial downloading
For initial setup of the IRC system, follow the downloading procedure below. When the preset data in
the master is downloaded to each satellite, existing preset data in the satellite, if any, is cleared.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “5 INITIAL D/L” from the displayed menu.
The INITIAL D/L window will appear.
3.
If you wish to distribute all preset data files in the master to satellites, select “29 ALL PGM.” (To display
the hidden menu for the initial downloading, scroll the screen to the right or left using the right-pointing or
left-pointing arrow key down on the screen.)
If you wish to distribute an individual preset data file, select the corresponding data item.
Enter an appropriate code range or specify an appropriate code(s) if needed.
The MACHINE No. window will appear.
4.
If you wish to download the preset data to all satellites, select “1 ALL.” If you wish to download the data
to certain satellite(s), select “2 MACHINE SELECT.” In this case, the MACHINE SELECT window will
appear.
Touch a desired machine number(s) line and select “YES,” and then touch the [CONTINUE] key.
Check the contents of the programming of all the satellites in the IRC system that have received
the preset data from the master.
(2) Maintenance downloading
To update the preset data for the IRC system, follow the downloading procedure below. The preset
data in the master is downloaded to each satellite without clearing its existing preset data.
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “6 MAINTENANCE D/L” from the displayed menu.
The MAINTENANCE D/L window will appear.
3.
Select a preset data item for maintenance from the displayed menu.
Enter an appropriate code range or specify an appropriate code(s) if needed.
The MACHINE No. window will appear.
4.
If you wish to download the preset data to all satellites, select “1 ALL.” If you wish to download the data
to certain satellite(s), select “2 MACHINE SELECT.” In this case, the MACHINE SELECT window will
appear.
Touch a desired machine number(s) line and select “YES,” and then touch the [CONTINUE] key.
NOTE
8. Downloading the contents of the programming to satellites – master