Sharp UP-3500 - Manual (Page 6)

5
(2) Error messages
If an error occurs, a corresponding error message is displayed.
To clear an error message, touch the [CLEAR] key.
Some of the error messages are listed below as examples.
List of sample error messages
Error messages (Default) Description
• This message prompts you to retry communication with the machine which you
have failed to communicate.
• The target machine is busy.
• The specified clerk has signed on at another machine.
• The entered GLU code is in use.
• The GLU code or related file memory is not enough.
• Transmission error
• The clerk who entered a GLU code are not authorized.
• IRC initial downloading before resetting
• The back-up master doesn't reply to the request.
• The master doesn't reply to the request.
• Remote printer or external printer off-line error
• The target machine is turned off.
• T-LOG buffer is full.
• The file in the master and that in the satellite are not of the same type.
• The specified clerk code is not present in the master list.
• The entered code is not listed.
• The entry made is not valid.
RETRY
BUSY
CODE NOT FREE
LACKING MEMORY
LINE ERROR
NO AUTHORITY
NON RESET
BACKUP DOWN?
MASTER DOWN?
CHECK CONNECT
POWER OFF
T-LOG FULL
TYPE ERROR
UNDEFINED CODE
ENTRY ERROR