Sharp UP-3500 - Manual (Page 49)

48
1.
Enter the PGM2 mode from the mode selection window.
2.
Select “1 READING” from the displayed menu.
The READING window will appear.
3.
Select “46 MWS CONFIG” from the displayed menu.
(To display the hidden menu for reading, scroll the screen to the right or left using the right-pointing or
left-pointing arrow key down on the screen.)
The PLEASE SELECT OUTPUT DEVICE. dialogue will appear.
4.
Select “1.DISPLAY” or “2.PRINT.”
If a receipt/report printer is not set up for the terminal, “1.DISPLAY” is the only valid choice.
Terminal No.
Time-out time (20 sec)
GATEWAY No.
Sample Print (master)
NOTE
10. Reading the contents of the Manager Work Station
(MWS) programming – master and satellite