Neff W7460X1GB - Manual (Page 17)

Operating the appliance en
17
– NO lights up, it is not possible to
add laundry.
For safety reasons, the washing
machine door remains locked
when the water level or
temperature is high, or while the
drum is rotating, and it is not
possible to add laundry during
this time.
2. To continue the programme, press
the Start button.
Changing the programme
1. Press the Start button to pause the
programme.
2. Select a different programme.
3. Press the Start button again. The
new programme starts from the
beginning.
Cancel the programme
1. Press the Start button to cancel the
programme.
2. To cool the laundry: Set the
programme to Rinse.
3. Press the Start button again. The
rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end
‹ appears in the display panel and the
start button indicator lamp is off.
If the 9 symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Note: Add less detergent for the next
washing cycle with the same load.
Removing laundry/switching
off the appliance
1. Open the washing machine door
and remove the laundry.
Notes
–
If you cannot open the washing
machine door, the appliance is
still locked. Wait until the
programme ends.
–
If the display panel does not light
up, energy-saving mode is active.
To activate, select any button.
2. Set the programme selector to the
Off position. The appliance is
switched off.
3. Turn off the tap.
Note: Not required for Aqua-Stop
models.
Notes
■
Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■
Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■
Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.