Neff W7460X1GB - Manual (Page 19)

Setting the signal en
19
M Setting the signal
Setting the signa l
1. Set the button and information signals
Set the programme selector to the Off position
and then turn the dial one position to the right.
Press the button for Eco Perfect à, hold it down
and, at the same time, turn the programme
selector one further position to the right.
2. Set the volume for button signals
The current signal volume now appears as a fig-
ure. Press the button for the Ready in time
repeatedly until the required signal volume is
set.
Go to point 3 to set the
volume for the informa-
tion signals, or
Set the programme selector to
the Off position to exit the
menu.
3. Set the volume for the information signals
Turn the programme selector
one further position.
Press the button for the Ready in time
repeatedly until the required informa-
tion signal volume is reached.
Set the programme selector
to the Off position to exit the
menu.