Neff W7460X1GB - Manual (Page 30)

en Positioning and connecting
30
Connection to the water pipes (¾" =
26.4 mm)
Connection to the appliance
Cold water connection only
If no hot water connection is present,
only connect the cold water inlet hose
and cover the hot water connection on
the appliance so that it is kept free of
dirt
Note: Carefully turn on the tap and
check that the connection points are not
leaking. The screw connection is under
water pipe pressure.
Cold water connection
Connect the water supply hose to the
water tap (¾" = 26.4 mm) and to the
appliance (not necessary for Aqua-Stop
models as this is permanently installed):
■
Model: Standard
■
Model: Aqua-Secure
■
Model: Aqua-Stop
Note: Carefully turn on the tap and
check that the connection points are not
leaking. The screw connection is under
water pipe pressure.
Water outlet
Caution!
Water damage
If the drain hose slips out of the wash
basin or the connection point during
draining due to high water pressure, any
escaping water may cause water
damage.
Secure the drain hose so that it cannot
slip out.
Note: Do not kink the water drain hose
or put strain on it lengthways.