Burley Honey Bee - Manual (Page 4)

Note: The tow bar mount clamps also function as wheel
guards. They will be referred to as clamps in these
assembly instructions.
Opening and Closing Your Trailer
1. Rotate front tube upward and rear tube back until they
meet on plastic saddles. FIGURE 1
2. Rotate frame locks and snap onto rear tube. FIGURE 2
3. To close trailer, reverse opening process.
To view a video clip of “Opening and Closing Your
Trailer” go to: www.burley.com/support/tutorials.cfm.
Attaching the Seat
Attach hooks on seat sides to D-rings by windows. PHOTO 1
FIGURE 1
FIGURE 2
PHOTO 1: Seat sides
4 B U R L E Y H O N E Y B E E O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L
CHECK THAT THE FRAME LOCKS ARE PROPERLY ENGAGED
BEFORE USING THE TRAILER. FAILURE TO DO SO CAN RESULT IN
SERIOUS INJURY.
WARNING
IMPORTANT
ALWAYS KEEP SEAT ATTACHMENTS FASTENED
WHILE TRAILERING.
TRAILERS CAN TIP OVER, CAUSING DAMAGE TO TRAILER AND
SERIOUS INJURY TO PASSENGERS. AVOID CAUSES OF TIP OVER,
ESPECIALLY:
• CHILDREN LEANING OR BOUNCING
• HITTING POTHOLES, CURBS, OTHER ROAD OBSTRUCTIONS
• TAKING TURNS TOO FAST
• SUDDEN SWERVING
• IMPROPER WHEEL INSTALLATION OR TIRE INFLATION
WARNING
Frame Locks
Front
Rear
D-ring
Hook
Plastic Saddles