Burley Honey Bee - Manual (Page 7)

Installing Cover
1. At top of frame, stretch elastic loops around handlebar
mounts.
2. Match hook and loop fastener strips on cover to strips on
trailer front and rear.
3. Hook O-rings on cover over ends of side frame tubes.
Attaching Handle
1. Loosen knobs.
2. Slide handle into lower handlebar receivers and tighten
knobs securely. To change height position, flip handle
over. PHOTO 5
Installing Safety Flag
Insert flag pole into hole in top of LEFT handle bar
receiver.
PHOTO 6
PHOTO 5: Tighten knob clockwise
PHOTO 6
B U R L E Y H O N E Y B E E O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L 7
IMPORTANT
DO NOT USE TRAILER WITHOUT SAFETY FLAG.
Inserting flag pole in handlebar receiver
Tighten Knob
Handle Bar