Boyo - Vision Tech America AVD701 - Manual (Page 14)

14
BASIC OPERATION
TURNING ON/OFF THE UNIT
Press button on the front panel or on the remote control to turn the unit on. When
the unit is on, press button on the front panel for several seconds or press on
the remote control will turn the unit off.
PANEL ANGLE ADJUST
The front monitor panel can be turn down or turn up to some degree by using
/
buttons on the front panel.
SOUND ADJUSTMENT
Repeatedly press SEL button on the front panel of the unit or on the remote control to
select the desired adjustment mode. The adjustment mode will change in the
following order:
VOL BAS TRE BAL FAD BRI CON COL
(volume bass treble balance fade brightness contrast color)
After selecting your desired mode, you can adjust the current mode being displayed
by using VOL+/- buttons on the front panel or VOL+/VOL- buttons on the remote
control. Note: When P-EQ mode is activated (not in EQ OFF mode), press SEL
button to select the modes. And Bass /Treble modes are invalid. (Shown as below)
VOL BAL FAD BRI CON COL
REMOTE SENSOR
There is a remote sensor on the front panel. You can point the remote control to the
remote sensor and press functions keys on the remote control to control the unit.
Note to operate it within the certain operation angle.
VOLUME LEVEL ADJUSTMENT
Press the VOL
+ / - buttons on the front panel of the unit or VOL+/VOL- buttons on the
remote control to adjust the volume level. You can also adjust the volume level by
tapping the volume bar displayed on the screen.
MUTE FUNCTION
Press MUTE button on the front panel shortly or on the remote control will mute
the sound. Press it again will resume the sound.
Hold press MUTE button on the front panel to switch off the TFT display, then touch
the screen or press buttons to switch on the display.
MODE SELECTION
When the unit is on, press
SRC
button on the front panel or MODE button on the
remote control to select the desired mode to enjoy. Such as RADIO, DISC, SD/USB,
AV IN, BT, MY MUSIC mode.