Boyo - Vision Tech America AVD701 - Manual (Page 27)

27
MENU OPERATION
Before you read this Bluetooth instruction please note the following points:
a) The Bluetooth function is optional, you just can use this function which you bought
the products including Bluetooth function.
b) This function needs your mobile phone support Bluetooth.
c) The initial secret code is “0000”.
※ Use the Bluetooth mobile phone to pair with the unit. During any mode, setting
your mobile as “Bluetooth connect” when it is connected successfully, the
screen will show a “CONNECT OK” word.
※ --- click to enter into the Dial interface.
Use the number buttons (0-9,＊, #) on the dial keypad on the left of the screen
to input the number you need. Click
icon to clear the number you input.
Then click to make an outgoing call. Click to hang up the call.
When there is an incoming call, click
to pick up the call or click
to
hang up the call.
--- click to transfer the voice between the main unit and the Bluetooth
mobile phone.
When connected OK and in Dial interface, click again to disconnect it
(note Pair is in normal state).
※ --- click to enter into the Call Record interface.
In this interface, you can search the received calls, dialed calls and missed
calls record. The phone numbers that stored in SIM card will be displayed on
the right-bottom zone of the screen.
※ --- click to enter into the BT music interface.
The unit supports Bluetooth audio function. If your mobile phone supports A2DP
function, when the paring is ok, you can choose the unit you have paired to play
the stereo music.