Boyo - Vision Tech America AVD701 - Manual (Page 17)

17
MENU OPERATION
press AMS icon on the screen, the radio searches from the current frequency
and checks the signal strength until one cycle search is finished. And then
stations are stored into the preset number button in turn according to the
strength of the stations. When auto seek is finished, it will enter into preset scan
mode automatically.
— Program Scanning
Shortly press AMS button on the remote control or click AMS icon on the
screen to scan all station presets saved in memory. And it will hold at each
station for several seconds.
※ STATION STORING
The preset buttons (numeric buttons 1~6) on remote control and M1~M6
frequency bar displayed on right zone of the touch screen can be used to store 6
stations in each band for convenient access to your favorite stations. The
stations might be FM1, FM2, FM3, AM1, AM2 band. The operation is as below:
„
Programming stations
1. Select the desired band, then tune in the station you want to store in
memory.
2.
Press and hold one of the preset buttons or M1~M6 frequency bar for
several seconds, the current station will be stored to the location button.
Repeat steps 1. and 2. to program additional stations.
„ Quick tuning
Select the desired band, then press one of the six preset buttons on remote
control or tap M1~M6 frequency bar displayed on screen will retrieve the
corresponding station which had been stored in the memory.
※ MONO/STEREO
You can press ST button on remote control or click ST icon on the screen to
select mono or stereo mode. When click ST icon, it changes to MO icon. When
click MO icon, it changes to ST icon.
You can sometimes improve reception of distant stations by selecting mono
operation.
※ LOCAL/DISTANCE
Press LOC button on the remote control or click LOC icon on the radio menu to
select between local and distant stations. When click LOC icon, it changes to
DX
icon. When click DX icon, it changes to LOC icon.
Local setting for reception of strong station, and a distant setting for reception
of weaker stations.
When search station in local mode, if there is no station available, it will switch
to distant mode and search station automatically. If there is no station available,
it will stop searching and return to local mode.
When search station in distant mode, if there is no station available, it will stop
searching in distant mode.