Boyo - Vision Tech America AVD701 - Manual (Page 7)

7
INSTALLATION
Notes:
y
Choose the mounting location where the unit will not interfere with the normal
driving function of the driver.
y Before finally installing the unit, connect the wiring temporarily and make sure it is
all connected up properly and the unit and the system work properly.
y Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
y Consult with your nearest dealer if installation requires the drilling of holes or
other modifications of the vehicle.
y Install the unit where it does not get in the driver’s way and cannot injure the
passenger if there is an emergency stop.
y If installation angel exceeds 30° from horizontal, the unit might not give its
optimum performance.
y
Avoid installing the unit where it would be subject to high temperature, such as
from direct sunlight, or from hot air, from the heater, or where it would be subject
to dust, dirt or excessive vibration.
Preparation
Please read entire manual before installation.
Before install the unit, please remove the two screws that locking the deck on the top
of the unit.
Before You Start
Disconnect negative battery terminal. (Consult a qualified technician for instructions).
Avoid installing the unit where it would be subject to high temperature, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
30
Frame
Bracket
Bracket