Bissell 3593 - Manual (Page 10)

10
Use only BISSELL Style 7 Replacement Upper Tank
Filters in your CleanView Bagless Power Trak Plus.
Unplug the cleaner from electrical outlet.
The Upper Tank Filter can be reached by removing the Dirt
Container, reaching underneath the Upper Tank and turning
the rim of the Filter Frame to unlock. Pull straight down to
remove. Brush the dirt off the Louvers and Upper Tank Filter.
The foam Upper Tank Filter may be removed and hand
washed in cold water with mild detergent. Rinse well then
air dry thoroughly before replacing.
The Upper Tank and Louvers may also be wiped clean with
a damp cloth.
Note: For easier access, the entire Upper Tank
may be removed by turning the knob on the
back of the cleaner to unlock and pulling the
entire tank straight out.
Use only BISSELL Style 7 Replacement Pre-Motor
Filters and Style 7 Post-Motor Filters in your CleanView
Bagless Power Trak Plus.
Unplug the cleaner from electrical outlet.
The Pre-Motor Filter protects the motor from dirt particles.
It is located in the slide out tray underneath the Dirt
Container. If the Filter becomes dirty, pull out the tray, lift
out the Filter and clean.
The Post-Motor Filter assists in the filtration process to
return clean air to the room. It is located behind the door on
the side of the cleaner. If the Filter becomes dirty, open the
door, remove the Filter and clean.
Note: This model comes with a white, pleated
HEPA Media Filter. This Filter is not washable
and must be replaced. A standard washable
Filter may be purchased as an optional item.
Please refer to page 15 for ordering.
The standard Filters may be hand washed in cold water
with mild detergent. Rinse well and air dry thoroughly
before replacing.
Post-Motor
Filter
Pre-Motor
Filter
WARNING:
Do Not operate cleaner
with damp or wet
Filters or without all
Filters in place.
1.
2.
3.
4.
Cleaning The Pre-Motor and Post-Motor Filter
Cleaning The Upper Tank & Filter
1.
2.
3.
4.