Bissell 3593 - Manual (Page 7)

Press the Handle Release Pedal with your foot to place
your vacuum into one of three cleaning positions.
Upright- For storage and above floor cleaning with tools.
Normal Cleaning- Press Handle Release Pedal once. Use
for most household floor cleaning tasks.
Low Cleaning- With the vacuum in normal cleaning
position, press Handle Release Pedal again. Use for
reaching under low furniture such as tables, chairs
or beds.
The Powerfoot/Rotating Floor Brush on your vacuum
can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance,
adjust to the lowest practical setting. If your
cleaner is difficult to push, adjust to the next
higher setting.
Place Handle in Upright Position.
Turn Height Adjustment knob to desired setting.
Lowest Setting For bare floors.
Medium Settings For short and medium
pile carpets.
Highest Setting For plush pile carpet.
Place the Handle in the normal cleaning position and the
Powerfoot will adjust to the setting chosen.
NOTE: You may also adjust the setting while
in the normal cleaning position.
To move your cleaner from room to room, put the
Handle in the upright position, tilt the cleaner back on its
rear wheels and push forward.
The cleaner can also be moved by using the
Carrying Handle on the back.
1.
Transporting Cleaner
7
1.
2.
3.
Height Adjustment
How To Use Your Vacuum
Handle Positions
1.
2.
3.
Tip:
Your vacuum features
a Quick-Release
Cord Wrap. To
remove the Power
Cord quickly and
easily, rotate the
Upper Cord Wrap
towards floor, and
slip Power Cord from
Upper and Lower
Cord Wraps.
Tip:
Before cleaning under
low furniture, check
area first for objects
that might harm the
unit or block the
Vacuum Hose.
1
2
3
2.
Carrying
Handle
NOTICE:
While vacuuming, certain carpets
and low humidity conditions may
generate small static discharges.
The discharges are entirely
harmless and are not associated
in any way with the main
power supply.