Bissell 3593 - Manual (Page 8)

The Clean Filter Indicator tells you when airflow in
the vacuum is reduced due to dirty Filters or a clog
in the hose. The Clean Filter Indicator will remain
green until the airflow is reduced. At that time, it
begins to change to red. When it is fully red, the
airflow is significantly reduced or blocked. Follow
the steps on page 10 to clean your Filters. All Filters
in the vacuum should be cleaned or replaced when
the Clean Filter Indicator turns red.
If the indicator remains red after all Filters have
been cleaned, follow the steps on page 12 to check
for and clear clogs.
Your CleanView Bagless Power Trak Plus is not only a
powerful carpet and rug vacuum cleaner, it’s also
a versatile above floor vacuum cleaner when you
select one of the special tools.
Raise Handle to Upright Position.
Grasp the Quick Reach Handle and lift Hose Wand to
separate from suction intake opening.
Attach tools by firmly pushing onto Vacuum Hose or
Extension Wand.
Dusting Brush/Upholstery Tool: Two types of cleaning
tools in one attachment.
• Use the Dusting Brush to dust furniture, blinds,
books, lamps, shelves and baseboards.
• Slide the brush off to use the Upholstery Tool on
cushions, draperies and fabrics.
Crevice Tool: Use in tight narrow spaces.
Extension Wand: Use with desired attachment for a
longer reach.
TurboBrush: Use rotating brush action for small areas
such as stairs and upholstery.
Note: Press gently when using the
TurboBrush to gain maximum cleaning.
Too much pressure will cause the brush
to stop rotating.
Stair Cleaning Tool (Optional Item): Use for stairs,
area rugs, and other small carpeted ares. This tool can
also be used for bare floors.
All items may not be included with your model.
More tools are available; to order please refer to
page 15.
8
1.
2.
Tip:
Hair, string and small objects can block
the Vacuum Hose or Tools. Check them
occasionally for obstructions.
CAUTION:
The Rotating Floor Brush
continues to rotate while tools
are in use. To reduce the risk
of injury from moving parts,
always move the cleaner with
the Carrying Handle at the
back of the cleaner. Always
place vacuum cleaner on floor
with Handle in Upright position
when using tools. Never place
your fingers under the cleaner
when it is running. Never place
Powerfoot on furniture or
uneven surfaces. Do not place
vacuum cleaner close enough
to objects to pull them into
rotating brush.
Clean Filter Indicator
NOTICE:
The Floor Brush will continue
to rotate while you use your
vacuum for above floor cleaning.
To prevent carpet damage, do
not lean on the vacuum or let the
Powerfoot tilt forward.
3.
Special On-Board Tools