Philips SENSEO® Quadrante Cafetera de monodosis de café User Manual

Page 8

Advertising
background image

8

D

Note:

Make sure the coffee in the pod or pods

is evenly distributed and press the pod or

pods lightly into the pod holder.

B

Warning:

Never put normal ground coffee or use

torn pods in the machine, as this causes it to

become blocked.

6

Close the lid and lock the lever (Fig. 6).

Push down the lid lever until it snaps home

with a click.

B

Warning:

Make sure the lid is closed properly and the

lid lever is locked before you start brewing

coffee.

7

To adjust the drip tray to the size of the cups

you want to use, first detach the drip tray by

sliding it slightly upwards (1) and then pulling it

towards you (2) (Fig. 13).

8

To reattach the drip tray, push it against the

front of the machine at the required height

(1). Make sure the top of the back plate of

the drip tray is on one line with one set of

guide lines. Then slide the drip tray slightly

downwards (2) to make its hooks slip into the

slots.

9

Place one or two cups on the cup tray.

E

Tip:

The cups you use should have a capacity of

at least 150ml. Do not use cups that are too

large, as they cause the coffee to get cold

more quickly.

10

HD7864 only: Select the desired coffee

strength by moving the strength selection slide

up or down. (Fig. 14)

• Select e for a small cup (60ml) of strong

coffee.

• Select d for a normal cup (100ml) of

coffee.

11

Press the 1-cup button q if you want to brew

1 cup. Press the 2-cup button qq if you want

to brew 2 cups. (Fig. 15)

2

Press the on/off button 3. (Fig. 9)

The light in the on/off button flashes slowly

while the water heats up. Heating up takes

approx. 75 seconds.

The coffee machine is ready for use when

the light in the on/off button lights up

continuously.

D

Note:

If the water reservoir does not contain

enough water to brew one cup of

SENSEO

®

coffee, the light in the on/off button

flashes rapidly and the 1-cup and 2-cup

buttons cannot be operated.

3

Move the lid release lever upwards and open

the lid (Fig. 4).

4

Place the appropriate pod holder in the

machine.

D

Note:

Make sure the pod holder is clean and the

sieve in the centre is not clogged, e.g. with

loose coffee grains.

• If you want to make one cup of SENSEO

®

coffee, use 1 coffee pod in combination

with the 1-cup pod holder q and the

1-cup button q. (Fig. 10)

• If you want to make two cups of

SENSEO

®

coffee, use 2 coffee pods in

combination with the deeper 2-cup pod

holder qq and press the 2-cup button

qq

. (Fig. 5)

5

Place the SENSEO

®

coffee pod or pods

properly in the centre of the pod holder with

the convex side pointing downwards.

D

Note:

Use SENSEO

®

coffee pods especially designed

for your SENSEO

®

coffee machine for a full

and round taste.

• Place 1 SENSEO

®

coffee pod in the 1-cup

pod holder q. (Fig. 11)

• Place 2 SENSEO

®

coffee pods in the

2-cup pod holder qq. (Fig. 12)

Advertising