Bodyguard T280C - Manual (Page 9)

S Se ettttiin ng g U Up p tth he e C Co om mp pu utte er r
tto o Y Yo ou ur r E En nv viir ro on nm me en ntt
1.4 Viewing Exercise Parameters
At the end of each exercise program, the computer will display four exercise parameters. These parameters will be TOTAL
DISTANCE, CALORIES BURNED, TOTAL EXERCISE TIME, and AVERAGE SPEED.
• TOTAL DISTANCE displays the distance travelled for the entire exercise.
• CALORIES BURNED displays the approximate caloric expenditure for the entire exercise.
• TOTAL EXERCISE TIME displays the length of the exercise in minutes and seconds.
• AVERAGE SPEED displays the average speed value for the entire exercise.
The total exercise parameters on the T280P – T280C – T320 will loop for 2 minutes, showing your exercise parameters until
you press CLEAR/STOP to exit back to the welcome screen. If you do not wish to view the exercise parameters, press the
CLEAR/STOP key to return to the welcome screen.
The T280P – T280C – T320 treadmills offer unique features that allow the user to tailor the treadmill to its current
environment. The treadmill computer can also display a series of diagnostic features and calibration features.
T280P – T280C – T320 treadmills allow you to select and modify the following settings :
• Language (English, French, Spanish)
• Weight Unit (Pounds or Kilograms)
• User ID
• Distance Unit (Miles or Kilometers)
• Time, Distance or Calories
• Warm Up (On or Off)
• Cool Down (On or Off)
• Heart Rate Control Options
• Heart Rate Access Options
2.1 Access to ”Settings Menu”
To view the above settings, you must enter into the “SETTINGS MENU” as followed:
1. Turn power ON.
2. While the introduction screens are displayed, simultaneously hold down the elevation INCREASE and the SELECT TOP keys.
3. Release the ELEVATION INCREASE and the SELECT TOP keys once entered into the Settings menu.
2.2 Language Feature
You can display all the instructions and information on the computer display screen in a choice of three languages.
To select a language: Enter into the Settings menu, see Section 2.1.
1. Select the LANGUAGE option, and press the JustGo TM /ENTER key to accept.
2. Select the language you wish to be displayed on the screen. Choose from English, French and Spanish. Press the INCREASE
or DECREASE keys to select the language.
3. Press the JustGo TM /ENTER key to accept.
From now on, all text will be displayed in the language you selected.
9
Setting Up the Computer
to Your Environment 2
• Beeper (On or Off)
• Speed Limits
• Big Number Option
• Learn Program
• Heart Rate Recovery
• Maximum duration (T320 only)
• Saving Option (On or Off) (T320 only)
• Pause Time
• Edit Text (T320 only)
• Add/Remove Program (T320 only)