BUSH DAB+ Digital Alarm Clock Radio with Dock for iPhone BCR33DABIP - Manual (Page 12)

BUSH BCR33DABIP
12
3. Press the Button to confirm.
Set Alarm
\

Note: before you set the Alarm, make sure that the clock time and snooze setting are already set.
1. Press the ALARM 1 or ALARM 2 button when the unit is on or in standby, the relative alarm icon or will
flash.
2. Using Alarm 1 as example, press the button to confirm “Alarm 1 Setup”, your radio will begin „Alarm 1
Wizard ‟, follow your display‟s instructions, configuring the following parameters:
1. Alarm On/Off: Press the or button to „On‟, press the button to confirm.
2. On time: 06: 00 (alarm sounding time)
3. Duration time: 15/30/45/60/90 minutes (alarm sounding lasting period)
4. Source: Buzzer/DAB/FM/iPod,
note that if the set alarm time comes but no iPod/iPhone is docked, the alarm
will use the buzzer instead.
5. Alarm frequency: Daily, Once, Weekends or Weekdays
6. If once is selected, you need to select the date of this alarm setting
7. Alarm volume: press the or button to select your desired alarm volume, and then press the
button to confirm, the unit will display „Alarm saved‟.
Operate SNOOZE
 When the Alarm is sounding, touch the SNOOZE area on top of your radio to activate the snooze function to
postpone the alarm, please note that the snooze time should be set in advance as per previous page instruction.

While in SNOOZE function, the relative alarm should blink, and display how long has elapsed, during this time,
you also can press the button to stop snooze, and press the button again to have your unit play. When the
unit reaches the end of the set SNOOZE time, it will sound again.
Turn Off the Alarm

Note: a. To turn alarm the alarm off temporarily, when the alarm is sounding press the button; To turn it off permanently,
please follow below option 2.
1. Press the ALARM 1/ALARM 2 button to enter the desired alarm setting.
System Setup