BUSH DAB+ Digital Alarm Clock Radio with Dock for iPhone BCR33DABIP - Manual (Page 5)

BUSH BCR33DABIP
5
Carefully remove your DAB+ Receiver from the box. You may wish to keep the packaging for future use.
In the Box
 Inside the box you will find:
 DAB+ Radio (Main Unit)
 Power Adapter
 User Guide
Positioning your DAB+ Radio
Place your DAB+ Receiver on a flat / stable surface. Make sure it is not subject to vibration/ movement.
Avoid the following locations:
 Where it may be close to heat radiating sources.
 Where the humidity is high and/or the ventilation may be poor.
 Where it may be dusty.
 Where it may be damp or possible for water to drip or splash onto the unit.
Adjusting the Antenna
The antenna should be extended to ensure good reception in both DAB+ and FM radio modes. It may be necessary to
alter the position of the DAB+ Radio and /or the antenna to achieve the best signal.
Using DAB+ Radio
How to Turn the Unit on

Connect the Power Adapter to the DC socket on the back of the unit. Insert the Power Adapter into the desired
wall
outlet, ‘Welcome to Digital Radio’ will appear on the display followed by ‘Time is not set’.

Press the button to turn the unit on conduct a full station scan in DAB mode and to automatically set the time.
Alternatively, you may ‘set the time’ by following the description on page 11.

Note: If you want to turn off the unit, you simply need to press the button again.

The full scan may take 1-2 minutes to complete and store all stations located.

Note: a. DAB+ stations will be displayed in alphanumeric order. The first station in the list will be played after scan.
b. If no DAB+ signal is found in your area, it may be necessary for you to relocate your radio and perform another
scan.
Getting Started and Using DAB+ Radio