BUSH DAB+ Digital Alarm Clock Radio with Dock for iPhone BCR33DABIP - Manual (Page 9)

BUSH BCR33DABIP
9
FM Mode
Switch to FM mode
1. Press the MODE button to switch to FM Mode from DAB Mode.

Note: If your radio currently in AUX/iPod mode, you can shift to FM Mode by repeatedly pressing the MODE button.
Once in FM mode, it will start at the beginning of the FM frequency range
(87.50MHz), or it will play the last FM station you were listening to.
Manual Scan
1. To manually change the FM frequency, press the or button to adjust the FM frequency by 0.05MHz
per press, or press and hold or to scan backwards or upwards for the next station.
Automatically Scan
1. To auto-search, simply press the button or the SCAN button .

Note: a. The display will show the frequency changing until it stops on the next station.
b. To ‘auto-search’ more effectively, please refer to below for ‘how to conduct scan setting’.
Modify Scan Setting
1. By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (interference)
from weak stations.
2. To change the scan settings to stop only at stations with good signal strength, press MENU  < Scan setting >
 „Strong stations only‟ press the button to confirm.
Modify Audio Setting
1. By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to-noise
ratio (hiss).
2. To play weak stations in mono, press MENU  < Audio setting >  Forced mono, press the button to
confirm.
View Station Information
1. Whilst listening to your desired FM program, you can browse the station information by pressing the INFO button
repeatedly such as Radio Text, Program Type, Station Name, Audio Type (Stereo or Mono), Time and Date.
Using FM Radio