Repackaging, shipping and returning to the factory, Instructions for repackaging and shipping – Bay Technical Associates DS72 User Manual
Page 29
DS72 HOST MODULE OWNER’S MANUAL
REPACKAGING, SHIPPING AND RETURNING TO THE FACTORY
24
REPACKAGING, SHIPPING AND RETURNING TO THE FACTORY
If your Bay Tech unit needs service, upgrade, or repair, return it to BayTech. Before dismantling your
equipment or before returning the unit for any reason, always call BayTech. The user should never
attempt repairs on this unit. If you need to return the Bay Tech unit to the factory for repair, warranty
work, or upgrade, follow the instructions below for repackaging and shipping.
INSTRUCTIONS FOR REPACKAGING AND SHIPPING:
a. Call BayTech to get a Return Authorization Number.
IMPORTANT: Without this number, BayTech will not accept returns.
b. Use the original packaging if available or choose a heavy cardboard box.
c. Surround your unit with a minimum of two inches of insulation.
d. Be sure to seal the box securely with strapping or packing tape. We do not recommend masking tape
or cellophane tape.
e. On the outside of the box, please write the Return Authorization
Number.
f. Ship the unit to the following address:
Bay Technical Associates, Inc.
200 N. Second Street
Bay St. Louis, MS 39520-1000, USA