Bay Technical Associates DS72 - Manual (Page 32)

DS-SERIES OWNER’S MANUAL
APPENDIX B
27
APPENDIX B
OPERATING WITH A MODEM
U.S. ROBOTIC MODEMS
COMMAND INTERPRETATION
AT&B1 Fixed Serial Port Rate (default)
AT&C1 Normal CD Operations (default)
AT&D2 Normal DTR Operations (default)
ATS0=1 Auto answer telephone line in 4 or fewer rings
ATE0 Modem does not display keyboard commands.
ATQ1 Place modem into quiet mode
AT&W0 Save the modem’s configuration in non-volatile memory
NOTE: To send all of the above at the same time, type the following command: AT&B1&C1&D2S0=1E0Q1&W0
ROCKWELL CHIP SET MODEMS
COMMAND INTERPRETATION
ATS23=59 Fixed Serial Port Rate (default)
AT&C1 Normal CD Operations (default)
AT&D2 Normal DTR Operations (default)
ATS0=1 Auto answer telephone line in 4 or fewer rings
ATE0 Modem does not display keyboard commands
ATQ1 Place modem into quiet mode
AT&W0 Save modem’s configuration in non-volatile memory
NOTE: To send all of the above at the same time, type the following command: ATS23=59&C1&D2S0=1E0Q1&W0