BenQ H200:A - Manual (Page 28)

BENQ Corporation
Function operation 26
Press “MENU” button to exit.
If the above information is displayed on the screen, set your signal input as optimal resolution (800x600) and
you will get the best picture in PC mode.
In PC Mode
Option Function Operation Range
Auto Adjustment Automatically adjusts Phase, Clock,
Picture Position in PC mode.
Press  or
“ENTER” to
execute it.
Brightness Adjusts screen brightness. Brighter screen.
Darker screen. 0 to 100
Contrast Adjusts image contrast. Higher contrast.
Lower contrast. 0 to 100
DPMS Protects screen and power saving
when no signal received. Useorfor
switching. On and Off
Resolution
Notifier Reminds user of the Optimal
resolution. Useorfor
switching. On and Off
Reset Restores all settings to default
values. Press or
“ENTER” to
execute it.
When set is ready to go into DPMS mode, the screen will display the information as follows:
The power indicator lamp flashes blue while the DPMS is on.
The power turns ON automatically when the display receives a signal again.
“DPMS” which stand for “display power management signaling” allows the display to maintain an automatic
power saving function.
In Video Mode
Option Function Operation Range
Brightness Adjusts screen brightness for easier
viewing of dark pictures such as night
scenes and black hair. Brighter screen.
Darker screen. 0 to 100
Contrast Adjusts image contrast Higher contrast.
Lower contrast. 0 to 100
Saturation Adjusts color saturation. Higher color saturation.
Lower color saturation. 0 to 100
Preset Mode Adjusts the preset user situation mode. Useorfor switching. Standard, Vivid,
Colorful, Bright
Room, Dark Room
Reset Restores all settings to default value. Pressor “ENTER” to
execute it.