BenQ H200:A - Manual (Page 40)

BENQ Corporation
Function operation 38
Adjust V-Chip setting
[1] FIRST TIME SET UP V-CHIP
Utility menu 1. Press “MENU ” or “MENU ”buttons on the Remote
Control or “Menu” button on Control Panel to choose the
“Utility ” main menu page as illustrated.
2. Pressorbuttons to select “V-CHIP Blocking Setting…”
item and Pressor “ENTER” to enter the sub menu.
3. You should set the password before using this function.
The sequence is as follows:
Input 4 digit.
Back to new password
Password match
Password mismatch.
4. Press orbuttons to select “MPAA” or “TV Guide” items.
5. Use orto switch between available choices for the selected option or change the option value.