Boyo VTR1004 - Manual (Page 12)

12
MAIN MENU
1. MENU SYSTEM
The on-screen menus allow you to set up all the features.
All setup data is safe from power loss and stored in the hard disk.
1.1. SELECTING THE MENU
Press the MENU/ENTER ( ) Button to select a menu item.
If you press the ESC button, it returns to the previous menu.
1.2. POSITIONING THE YELLOW COLOR HIGHLIGHT
Use up and down buttons to position the menu highlight.
Press left and right buttons to move to the next value in the selected menu.
1.3. SETTING AN OPTION
Press left and right buttons to change the option if it is between < and > marks.
Press up and down buttons if there are no marks.
1.4. SPECIAL BUTTON FUNCTION
● Fn+ESC button:
Returns to Live screen mode immediately from anywhere in the menu.
● Fn+Right button: Turns ON/OFF the status bar when in the Live screen mode.
● Fn+Left button at single channel display:
Start camera sequence and display
the cameras in quad mode from single camera view in the LIVE screen mode. (Toggle)
● Fn+Up button: Upload configuration file in the LIVE screen mode.
● Fn+Down button: Download configuration file in the LIVE screen mode.
● Fn+Up/Down button in numeric setting menus: Increase/Decrease the
number by 10.
● Fn+Enter button at live display: Event data backup without Monitor .
● Fn+”1” button at live display: Shutdown Hot Key .
* It runs on LIVE screen mode. If status of DVR was recording when press
“Fn+1” button, automatically recording will be started at next booting.