Boyo VTR1004 - Manual (Page 24)

24
3.3 NETWORK
This menu sets the network configurations as either static IP or DHCP.
< NETWORK MENU SCREEN WHEN DHCP IS OFF >
To set a network address:
① Select a row using the up and down buttons.
② Press the MENU/ENTER button, and the address pop-up window will be displayed.
③ In the pop-up window, press the up and down arrow buttons to change the value.
④ Use the left and right arrow buttons to go to the next numeric character.
⑤ To finish setting the address, press the MENU/ENTER button.
< SET IP ADDRESS POP-UP WINDOW >
NOTE
• To speed up setting, you may use Fn+Up/Down button.