Boyo VTR1004 - Manual (Page 18)

18
3.2.3.1 MOTION
Set the MOTION ON/OFF, press the LEFT/RIGHT button.
Set the ALARM OUT ON/OFF, press the LEFT/RIGHT button.
< EVENT TYPE SCREEN >
To set the AREA, press the MENU/ENTER button then it will go to AREA menu as
below.
<AREA setup>
① Yellow area: Motion detected area
② To change the SENSITIVITY, press Fn + Left/Right button.
SENSITIVITY level 10 means the most sensitive
③ To disable the motion detect area, press the MENU/ENTER button.
Then partial block color change into pink color.
Press Left/Right button to change the cursor position.
CURSOR
Yellow area
(Motion detected area)
Sensitivity level