Boyo VTR1004 - Manual (Page 8)

8
1. FRONT PANEL
● Buttons (1~9)
1. NUMERIC Buttons (1~4)
Used to select the camera number
2. RECORD Button (REC)
Press it to start recording, and once again to stop. A password is required to stop
recording. The orange LED is on when the recording is in progress.
3. SEARCH Button (SER)
Press it to search the recorded image data.
4. FUNCTION Button (Fn)
Used in combination with other buttons, it allows you to access the special functions.
Refer to page 13 for detail.
5. ESCAPE Button (ESC)
Press it to cancel or exit from selected modes and menus.
6~9. ARROW Buttons ( )
These are used to move the highlight or to change the option in menu.
10. MENU/ENTER Button ( )
This button brings up the menu, and then functions as “ENTER”.
● LEDs (11~14)
11. POWER: The green LED indicates power.
12. REC (RECORD): The orange LED indicates that the record is on going.
13. ALARM: The red LED indicates that the ALARM is detected or the system failed.
14. LAN: The orange LED indicates that the system is connected to the network.
2
1
6
4
10
7
11
8
9
13 12
3
14
5