Brother MFC 990cw - Manual (Page 101)

Making copies
89
12
Making N in 1 copies or a
poster (Page Layout)
12
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Note
Watermark Copy, Book Copy, Sort
and Enlarge/ Reduce are not available
with Page Layout.
Important
„ Please make sure paper size is set to
Letter or A4.
„ You cannot use the Enlarge/ Reduce
setting with the N in 1 and Poster features.
„ If you are producing multiple colour
copies, N in 1 copy is not available.
„ (P) means Portrait and (L) means
Landscape.
„ You can only make one poster copy at a
time.
a
Press (Copy).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Page Layout.
e
Press Page Layout.
f
Press d or c to display Off(1in1),
2in1(P), 2in1(L), 4in1(P),
4in1(L) or Poster (3 x 3).
g
Press the setting of your choice.
h
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to step i.
i
After the machine scans the page,
press Yes to scan the next page.
j
Place the next page on the scanner
glass.
Press Mono Start or Colour Start.
Repeat steps i and j for each page of
the layout.
k
After all the pages have been scanned,
press No to finish.
Place the document face down in the
direction shown below:
„ 2 in 1 (P)
„ 2 in 1 (L)
„ 4 in 1 (P)
„ 4 in 1 (L)
„ Poster (3 x 3)
You can make a poster size copy of a
photograph.