Brother MFC 990cw - Manual (Page 70)

58
7
Voice operations
7
Voice calls can be made either with the
handset, the cordless handset (MFC-990CW),
the speaker phone, an extension or external
telephone, by dialling manually, or by using
Quick Dial numbers.
Note
If you have a MFC-990CW, please also refer
to the DECT™ Handset BCL-D70 User’s
Guide.
Making a telephone call
7
a
To start a voice call, do one of the
following:
„ Pick up the handset. (MFC-790CW
only)
„ Press Speaker Phone.
b
When you hear the dial tone, enter a
number using the dial pad or pressing
the Speed Dial.
c
If you pressed Speaker Phone, speak
clearly toward the microphone .
d
To hang up, do one of the following:
„ Replace the handset. (MFC-790CW
only)
„ Press Speaker Phone.
Answering calls with the
Speaker Phone
7
When the machine rings, instead of lifting the
handset, press Speaker Phone on the
machine. Speak clearly toward the
microphone . To end the call, press
Speaker Phone.
Note
If you have a bad connection, your caller
might hear your voice echoed during the
call. If you experience this problem, pick
up the handset, or hang up and try the call
again.
Mute
7
For MFC-790CW
7
a
Press Erase/Mute to put a call on Hold.
You can replace the handset without
disconnecting the call.
b
Pick up the machine's handset or press
Speaker Phone to release the call from
Hold.
Note
You can pick up an extension telephone
and continue speaking without releasing
the call from Hold on the machine.
Telephone and External devices
7