Brother MFC 990cw - Manual (Page 78)

Chapter 7
66
Changing the remote codes
7
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 5 1. The preset
Remote Deactivation Code is # 5 1. If you
want to, you can replace them with your own
codes.
a
Press MENU.
b
Press a or b to display Fax.
c
Press Fax.
d
Press a or b to display
Setup Receive.
e
Press Setup Receive.
f
Press a or b to display Remote Codes.
g
Press Remote Codes.
h
Press On (or Off).
i
Do one of the following.
„ If you want to change the Remote
Activation Code, enter the new code.
Press OK, go to step k.
„ If you do not want to change the
Remote Activation Code, press OK,
go to step j.
j
Do one of the following.
„ If you want to change the Remote
Deactivation Code, enter the new
code.
Press OK, go to step k.
„ If you do not want to change the
Remote Deactivation Code, press
OK, go to step k.
k
Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code and
Remote Deactivation Code to another
3-digit code using the numbers 0-9, l, #.
• Remote Codes might not work with some
telephone systems.