Brother MFC 990cw - Manual (Page 46)

34
5
Entering Fax mode
5
When you want to send a fax, or change fax
send or receive settings, press the
(Fax) key to illuminate it in blue.
The LCD shows:
Press d or c to scroll through the Fax key
options. Some functions are only available
when sending monochrome faxes.
„ Fax Resolution (See page 39.)
„ Contrast (See page 38.)
„ Broadcasting (See page 37.)
„ Preview (See page 36.)
„ Delayed Fax (See page 40.)
„ Batch TX (See page 40.)
„ Real Time TX (See page 39.)
„ Polled TX (See page 84.)
„ Polling RX (See page 82.)
„ Overseas Mode (See page 40.)
„ Glass ScanSize (See page 35.)
„ Set New Default (See page 41.)
„ Factory Reset (See page 41.)
Press the option you want.
Faxing from the ADF
5
a
Press (Fax).
b
Place the document face down in the
ADF. (See Using the ADF on page 21.)
c
Enter the fax number using the dial pad.
You can also enter the fax number by
pressing Speed Dial, press the
number you want and press
Send a fax.
Note
You can preview a fax message before
sending it by setting Preview to On.
For details, see How to preview an
outgoing fax on page 36.
d
Press Mono Start or Colour Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a mono fax when the memory
is full it will be sent in real time.
Sending a Fax
5
FAX/TEL FAX/TEL
Fax Resolution
Standard Standard
Contrast
Auto Auto
Broadcasting
Off Off
Speed Dial History