Philips Azur Fer vapeur - Manual (Page 15)

Drip stop
This iron is equipped with a drip-stop function: the
iron automatically stops producing steam when
the temperature is too low, to prevent water from
dripping out of the soleplate. When this happens,
you may hear a sound.
Automatic shut-off function (specific types
only)
The automatic shut-off function automatically
switches off the iron if it has not been moved for a
while.
, The red auto-off light flashes to indicate that
the iron has been switched off by the automatic
shut-off function.
To let the iron heat up again:
1 Pick up the iron or move it slightly.
, The red auto-off light goes out.
, If the temperature of the soleplate has dropped
below the set ironing temperature, the amber
temperature light goes on.
2 If the amber temperature light goes on after
you have moved the iron, wait for it to go out
before you start ironing.
Note: If the amber temperature light does not go on
after you move the iron, the soleplate still has the right
temperature and the iron is ready for use.
EnGlish 15