Philips Azur Fer vapeur User Manual
Page 21
Problem
Possible cause
Solution
You have put an
additive in the
water tank.
Rinse the water tank and do not
put any additive in the water tank.
The set
temperature is
too low for steam
ironing.
Set a temperature of or 2
higher.
You have used
the steam boost
function at a
temperature setting
below 3.
Set the temperature dial to a
setting between 3 and MAX.
Water drips
from the
soleplate
after the
iron has
cooled
down or has
been stored.
You have put the
iron in horizontal
position with water
still left in the water
tank.
Empty the water tank.
Flakes and
impurities
come out of
the soleplate
during
ironing.
Hard water forms
flakes inside the
soleplate.
Use the Calc-Clean function
one or more times (see chapter
‘Cleaning and maintenance’,
section ‘Using the Calc-Clean
function’).
EnGlish
21