Philips Azur Fer vapeur User Manual
Page 9
Tip: If the tap water in your area is very hard, we
advise you to mix it with an equal amount of distilled
water. Do not use distilled water only.
1
Make sure the appliance is unplugged.
2
Set the steam control to position 0 (= no
steam).
3
Open the cap of the filling opening.
4
Tilt the iron backwards and use the filling cup
to fill the water tank with tap water up to the
maximum level.
Do not fill the water tank beyond the MAX
indication.
Do not put perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the water
tank.
5
Close the cap of the filling opening (‘click’).
selecting the temperature and steam
setting
temperature and steam settings
Fabric type
Temperature
setting
Steam
setting
Steam
boost
Ionic
DeepSteam
(specific
types only)
Linen
MAX
5-6
\
yes
Cotton
3
3-4
\
yes
Wool
2
1-2
N.A.
yes
EnGlish
9