Bosch HBN 43M 550 A - Manual (Page 31)

31
Cleaning function
Main and Mini oven
The cleaning function is a regeneration program.
If the self-cleaning components of the oven are no
longer cleaning themselves sufficiently, they can be
regenerated using this function. They are then fully
operational again.
Remove accessories and ovenware from the oven.
Caution Before you do this, you must clean the oven
surfaces which are not self-cleaning. Otherwise
stains may appear that cannot be removed.
Setting procedure
Main oven 1. Set the function selector to 3D hot air
˜
.
2. Set the temperature selector to clean.
3. Press the 6 button until the ? symbol flashes.
4. Use the + button to set 1.00 hour.
The setting is adopted after a few seconds.
The oven will switch off automatically after one hour.
Switch off the function selector.
Mini oven 1. Set the function selector to
t
.
2. Set the temperature selector to clean.
Heat the clean function for 1.00 hour.
The mini oven has no automatically disconnection
off the clean function.
Switch off the function selector and the temperature
selector.
When the oven has cooled Wipe away salt residues from the self-cleaning
components using a moist cloth.