Blaupunkt Sydney RCM 126 - Manual (Page 13)

S-LO
CDC UPD
AUX
Appendix
To adjust the seek tuning
sensitivity for local recep-
tion.
LO 1 high sensitivity
LO 3 low sensitivity
The seek tuning sensitivity
values can be separately set
for AM and FM.
Use this function to delete
CD names during CDC op-
eration, in order to have
more storage capacity for
new discs available. See
“Deleting CD names with
DSC-UPDATE”.
This menu item is not avail-
able if you have connected
a CD changer (A 05 or
A071).
The setting made at the fac-
tory is AUX OFF.
If you have connected an
external piece of equipment
via AUX, this function must
be set to AUX ON.
Amplifier
Output power: 4 x 23 W RMS power
to DIN 45324 at
14.4 V
Tuner
Wavebands:
FM
AM :
4 x 35 W max. power
87.5 107.9 MHz
1710
FM sensitivity: 0.9 at 26
to-noise ratio
FM frequency response:
Tape player
Frequency response:
Questions? Problems?
Call
VOL FIX Use this function to select Overview of the DSC factory
settings the volume at which the ra-
dio is set when it is switched
on. Adjust the desired vol-
ume level with When
adjusted to the
system will come on with the
volume selected before
switching the radio off.
CD NAME
LOUDNESS
TA VOL
SPEECH
BEEP
ANGLE
BRIGHT
COLOUR
LED
LEARN KC
READ KC
S - D X
S - L O
CD UPD
AUX
VOL FIX
3
35
0
4
0
16
green
ON To quit the DSC programming mode
and store the adjustment:
l
Press DSC.
10 sec.
1
1
OFF
0
Subject to modifications!
26