Blaupunkt Sydney RCM 126 - Manual (Page 6)

Important notes
Precautions
Before starting to use your new car radio,
please read the following information care-
fully.
Traffic safety
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situation at all times. Never use your car
radio in a way that could distract you.
Please keep in mind that you travel a dis-
tance of 15 yards per second at a speed of
only 30 miles per hour.
Should the traffic situation become particu-
larly demanding, we advise you not to use
the radio.
Always make sure that you are still able to
hear any warning signals coming from out-
side of the vehicle, such as police or fire
engine sirens, so that you can react ac-
cordingly.
Therefore, you should always select a
moderate volume for playing your car radio
while you are driving.
Installation
If you would like to install your new car ster-
eo yourself or add other audio components
to existing ones, then please read carefully
the enclosed instructions on installation and
connection.
In order to ensure that the set operates prop-
erly it is necessary that the positive power
supply line is connected via the ignition and
the permanent
V lead.
Do not ground the loudspeaker outputs!
Telephone mute
If you have a mobile telephone installed in
your vehicle, radio, tape or changer play-
back can be muted automatically when us-
ing the phone (telephone mute).
“PHONE” will then appear in the display.
Accessories
Use only the accessories and spare parts
approved by Blaupunkt.
You can use the following Blaupunkt prod-
ucts with this car stereo:
Changer
CDC A 05 or CDC A 071
theft protection system
The Blaupunkt Security System
provides an effective and convenient means
of theft deterrence. Each unit operates only
when
it’s own card is inserted. No card, no
use. It’s that simple.
The units flashing tongue and security sys-
tem window stickers emphasize that point
to the potential thief. No bulky release pan-
el to put in your pocket under your seat
where thieves know to look for it. Just re-
move the card and put in your wallet or pock-
et. It’s that convenient.
This unit is supplied with two Keycards, a
blue “main” card and “screamer” card. The
difference: the
number (the
“radio pass data”) has been embedded into
the main card in case you ever need it.
In addition to convenient security, each card
has a personal memory bank for the FM1
and AMT band presets, bass, treble, bal-
ance, fader and DSC settings. The benefit:
two drivers, such as a husband and wife,
can store separate settings to their individ-
ual likings on their separate cards.
To replace a lost or stolen card, please
call l-800-920-21 21.
Putting the unit into operation
Turn the unit on.
2. Make the orange tongue stick out by
pressing it into the radio so that it pops
out.
3. Insert the into the slot with
the gold contact facing up and the ar-
row pointed into the unit.
The car radio is now ready for operation.
If a wrong is inserted, then “CARD
ERR” will appear in the display. In this case
please do not make any further adjustments.
The system will switch off after approxi-
mately ten seconds. When inserting anoth-
er card type (e.g. phone or credit card), the
display will show “WRONG KC” for approx-
imately two seconds.
4. Remove the wrong card and introduce
the correct after the display
indications “CARD ERR” or “WRONG
KC” disappear.
5. Press ON to turn the set on.
Removing the
Never pull out the directly!
l
First, slightly push in the
This releases the card and puts it in the
proper position for being removed.
l
Now you can pull it out.
Remote control
With the infrared steering wheel remote con-
trol and its signal-receiving apparatus you
can control all of the important functions of
your car audio system from the steering
wheel.
Amplifier
All Blaupunkt amplifiers
Auxiliary Input 7 607 890 093
Adapter for portable audio equipment, for
example.
Speakers
All Blaupunkt speakers
Replacing a
1. Insert the remaining and turn
on the set.
2. Press the DSC button and select
“LEARN KC” with
3. Press or
The display will switch to “CHANGE”.
4. Push in the The card is re-
leased and put in the proper position
for being removed.
5. Remove the first and insert
the new one while “CHANGE” is still
being displayed.
After the display indication “READY” or
“LEARN KC”,
6. press DSC.
Now you can also use the new for
operating your unit.
A maximum of two cards can be used for
the set.
When trying to “train” a third one, the ac-
cess authorisation for the
not used
for the “training” process will be deleted
automatically.
Loss of both
Please contact your dealer or in USA call
I-800-920-21 21.
12