Brother DCP-J525W User Manual
Page 30
Configuring your machine for a wireless network
26
3
Configuring your machine when the SSID is not broadcast
3
For MFC-J425W/J430W/J432W/J435W
3
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1
TKIP is supported for WPA-PSK only.
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press Menu.
c
Press a or b to choose Network.
Press OK.
d
Press a or b to choose Setup Wizard.
Press OK.
e
When Enable WLAN? is displayed, press OK to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
SSID (Network Name):
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
Open system
WEP
NONE
—
Shared key
WEP
WPA/WPA2-PSK
AES
TKIP
For example:
SSID (Network Name):
HELLO
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
WPA2-PSK
AES
12345678