Brother DCP-J525W User Manual
Page 32
Configuring your machine for a wireless network
28
3
For MFC-J280W/J625DW/J825DW/J835DW/J5910DW and DCP-J525W/J725DW/J925DW
3
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1
TKIP is supported for WPA-PSK only.
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press Menu.
c
Press Network.
d
(MFC-J825DW/J835DW/J5910DW and DCP-J925DW only)
Press WLAN.
e
Press Setup Wizard.
f
When Enable WLAN? or Switch Network interface to wireless? is displayed, press Yes to
accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g
The machine will search for your network and display a list of available SSIDs. Press a or b to display
<New SSID>, and press <New SSID>.
SSID (Network Name):
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
Open system
WEP
NONE
—
Shared key
WEP
WPA/WPA2-PSK
AES
TKIP
For example:
SSID (Network Name):
HELLO
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
WPA2-PSK
AES
12345678