Bogen LUMDMU - Manual (Page 13)

Playing Messages
Once messages have been recorded, they may be played over the
paging system as described below. Messages can also be queued by a
contact closure of one of the switch cable pair of the RJ-21 cable (See
figure 5).
Press the FUNC button until PLAY is displayed.
PLAY
Press the RUN button.
MSG-01
The first message is displayed.
Press the FUNC button to select a message other
than MSG-01 to play in.
MSG-09
Press RUN to play the message.
PLY-S09
Ply = Play, message #9 out off sequence.
DEL-S09
Configured delay between the messages
(see table 1).
1
2
3
4
NOTE: If a contact closure
comes in on the RJ-21 cable,
the message sequence will
stop. The contact closure
message will play until the
closure is removed. The
sequence message will resume
where it left off.
10