Bogen LUMDMU - Manual (Page 5)

3
Have Required Tools
The following tools are required for the installation of the MDMU
hardware an cabling.
■
■
■
■
■
■
■
Phillips screwdriver (small and large)
Standard blade screwdriver (small and large)
Wire strippers (24 AWG - 12 AWG)
Telephone test set
Tone out circuit tester (optional, for troubleshooting)
Volt-ohm Meter (optional for troubleshooting)
4 wood screws, if mounted on wall
Installation Steps
1
Mount the MDMU to either a wall, cabinet or a rack
(near the paging equipment if possible).
Figure 1. Wall Mounted Unit
2