Bogen LUMDMU - Manual (Page 8)

5
Set the MDMU options on the DIP switch. Refer to
the table below.
NOTE: Switches 1, 2, and 3
sets the number of messages in
a single queue sequence. The
timing between those
messages is set by switches 4,
5, and 6. Switch 7 sets the
total possible number of
messages for the unit. Switch
8 is always in the ON position.
REM OPTION BATTERY
SWITCH OFF ON
Figure 6 Set MDMU Options on DIP Switch
Table 1. DIP Switch Setting Definitions
MAX. No. of
MESSAGES IN
SEQUENCE: SET
SWITCH
# 1 TO SET
SWITCH
# 2 TO SET
SWITCH
# 3 TO SET
SWITCH
# 4 TO SET
SWITCH
# 5 TO SET
SWITCH
# 6 TO SET
SWITCH
# 7 TO
1 ON ON ON — — — —
2 OFF ON ON — — — —
3 ON OFF ON — — — —
4 OFF OFF ON — — — —
5 ON ON OFF — — — —
6 OFF ON OFF — — — —
7 ON OFF OFF — — — —
8 OFF OFF OFF — — — —
DEFAULT DELAY BETWEEN MESSAGES:
0:05 — — — ON ON ON —
0:10 — — — OFF ON ON —
0:30 — — — ON OFF ON —
1:00 — — — OFF OFF ON —
5:00 — — — ON ON OFF —
15:00 — — — OFF ON OFF —
30:00 — — — OFF OFF OFF —
NUMBER OF MESSAGES AVAILABLE:
1 TO 9 ON
01 TO 99
— — — — — —
OFF
5