Liebherr WTes 5972 Vinidor - Manual (Page 5)

15
Setting the temperature
The temperature of both com-
partments can be set sepa-
rately.
1 Upper compartment
2 Lower compartment
Reducing the temperature Press the Down button.
Increasing the temperature
Press the Up button.
- When pressing one of the buttons for the first time, the display
will start to flash.
- Pressing this button again enables you to change the temperature
setting.
- The electronic control system will switch over automatically about
5 seconds after the last time you pressed the button, and the
actual temperature will be displayed.
The temperature can be set at between +5°C and +20°C.
The following drinking temperatures are recommended for the
various types of wine.
Red wines: +14°C to +20°C
Rosé wines: +10°C to +12°C
White wines: +8°C to +12°C
Sparkling wines, Prosecco: +7°C to +9°C
Champagne: +5°C to +7°C
If you are storing wine for long periods of time, it should be stored
at a temperature of between +10°C and +12°C.
GB
Fan
The interior fan ensures a constant and even interior temperature
and a suitable climate for wine storage.
The humidity in the appliance can be increased even
further by activating the Ventilation button. This has
a particularly positive effect for long-term storage.
The increased level of humidity prevents the corks from drying out.
Note
If the appliance is operated in a low ambient temperature, the fan
may also run when the fan function is deactivated.
Additional functions
In set-up mode you can set the child lock and adjust the brightness
of the display. The child lock is designed to protect the appliance
from being switched off and the temperature setting from being
changed accidentally.
Activating the child lock
Press for 5 seconds. Display =
Display =
Display =
Display =
Deactivating the child lock
Press for 5 seconds. Display =
Display =
Display =
Display =
Door open alarm
If the door is left open for more than 60 seconds, the audible
warning signal will sound.
If the door must be opened for a lengthy period to place
items into the appliance, cancel the audible warning
signal by pressing the Alarm button.
The alarm switches back to standby when the door is shut.
Temperature alarm
If the temperatures in the interior are out of the permitted range,
the audible warning signal will sound and the temperature display
will flash.
After a lengthy power failure, the temperature in the interior may
have risen to too high a level. After the power supply returns, the
fall in temperature can be watched on the display.
• Cancel the audible warning signal by pressing the Alarm button.
The temperature display will stop flashing as soon as the tem-
perature in the interior has reached the set value.
Temperature alarm after a fault in the appliance
If the appliance develops a fault, the temperature in the interior
may rise too high or fall too low. The audible warning signal will
sound and the temperature display will flash.
If the temperature displayed is too high (warm), first check whether
the door is closed correctly.
If the temperature display continues to show a value that is too high
or too low after one hour, contact the customer service department.
• Cancel the audible warning signal by pressing the Alarm button.
If F1, F8, S1, S2, S7, or S8 appears in the display, the appliance
has suffered a fault. In this case, contact the customer service
department.